APC RAID Subsystem SCSI-SATA II Bedienungsanleitung PDF herunterladen (Seite 16)

SCSI to SATA II RAID Subsystem

User Manual

2.1.3 Controller Board Replacement

NOTE: It is necessary to use ESD anti-static device when handling

sensitive parts of the controller module.

1. Loosen the thumb screws. Raise the controller handle and pull out the

controller module until it moves out of the slot.

2. Release the memory module lock and remove the memory module.

3. Remove four screws at the bottom of the controller module. Note that there

are four hex screws supporting the controller board to the module case.

4. Remove the eight (8) lock nut screws at the front panel.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 89 90

Keine Kommentare

APC RAID Subsystem SCSI-SATA II Bedienungsanleitung Seite 16