APC AP8868 Betriebsanweisung PDF herunterladen (Seite 98)

90Metered Rack PDU User Guide

If you are unsure whether to upgrade any particular module, then upgrading all three is recommended.

1. Obtain the latest firmware files. See “To extract the firmware files:” on page 87.

2. Create a folder on your flash drive called apcfirm.

3. From the latest firmware files that you downloaded, add to the apcfirm folder the binary files for

the firmware modules that you would like to upgrade. Examples of the binary files for the three

firmware modules follow:

4. Use a text editor such as Microsoft Notepad to create a file called upload.rcf. Add to the file a

line for each firmware module that you want to upgrade as shown below:

BM=apc_hw0x_bootmon_xxx.bin

AOS=apc_hw0x_aos_xxx.bin

APP=apc_hw0x_rpdu2g_xxx.bin

5. Add the upload.rcf file to the apcfirm folder on the flash drive.

6. Connect the flash drive to the USB port on the Rack PDU.

7. Either cycle power or press the Reset button for the upgrade process to begin.

8. Wait for two to three minutes for the upgrade to complete. When complete, the Rack PDU

display will show the firmware version for three seconds and then will resume normal operation,

at which time you can remove the flash drive.

Firmware Module Binary File

APC Boot Monitor apc_hw0x_bootmon_xxx.bin

APC Operating System (AOS) apc_hw0x_aos_xxx.bin

Application Module apc_hw0x_rpdu2g_xxx.bin

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 104

Keine Kommentare

APC AP8868 Betriebsanweisung Seite 98