APC 900 Bedienungsanleitung

January 200978-8140-3691-5-A3M™ No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/ASInstructions

3M and Fibrlok are trademarks of 3M Company. Important NoticeAll statements, technical information, and recommendations related to 3M’s products are b

2Contents1.0 Summary ...

31.0 Summary1.1 3M™ No Polish Connector 8830-APC/AS terminates 250 µm or 900 µm single fibers with LC/APC interface and angle splice for superior opt

41.3 For situations where a suitable work area is not available, the case and plastic plate, which are included in the 3M™ Fiber Optic Angle Cleave Ki

5In this instance, use the fiber holder's clamp to prohibit the buffer from moving or stretching during the stripping process. Place the fiber into

63.9 Close the cleaver clamp #1 first. This process sets the appropriate cleave length. 3.10 Close the cleaver clamp #2.Note: Ensure there is no fibe

73.15 Verify the 8 mm cleave length again by using the length gauge on the assembly base. The 8 mm cleave length is measured from the end of the 900

84.5 When the fi ber holder is pushed toward the connector and stops, the fi ber bow should be seen as below. The fi ber will bow and lift the middle co

93M™ No Polish Connector, Kit and Tool Descriptions Packaging8830-APC/AS*No Polish Connector LC/APC SM Angle Splice, 250 / 900 µm(green trigger, green