APC SMT750RMI2U Bedienungsanleitung PDF herunterladen (Seite 13)

Smart-UPS Rack-Mount2U 750/1000/1500 VA 120/230 Vac, 3000 VA 100/120/208/230 Vac, 2200 VA 120 Vac 12

Customize the Main and Controlled Outlet Groups

Use the Control menus to change the Main Outlet Group and the Controlled Outlet Group settings.

Network Management Card Settings

These settings are available only on units that have a Network Management Card (NMC) and are set in the factory.

These settings can only be modified using an external interface, like the NMC web interface.

• NMC IP Address Mode

• NMC IP Address

• NMC Subnet Mask

• NMC Default Gateway

Function Factory Default Options Description

Name String

Outlet Group

Outlet Group 1

Edit these names using an external interface, such as the Network

Management Card Web interface.

UPS Name String UPS Outlets

Turn On Delay 0 sec

Set the value in

seconds

The amount of time the UPS or

the Controlled Outlet

Group

will wait between receiving the command to turn

on and the actual startup.

Turn Off Delay

• 0 sec (UPS Outlets)

• 90 sec (Controlled

Outlet Groups)

Set the value in

seconds

The amount of time that the UPS or

the Controlled

Outlet Group

will wait between receiving the command

to turn off and the actual shut down.

Reboot Duration 8 sec

Set the value in

seconds

The amount of time that the UPS or

the Controlled

Outlet Group

must remain off before it will restart.

Minimum Return

Time

0 sec

Set the value in

seconds

The amount of battery runtime that must be available

before the UPS or

the Controlled Outlet Group will turn

on.

Load Shed On

Battery

Disabled

• Shutdown with

Delay

• Shutdown

immediately

• Turn off

immediately

• Turn off with delay

• Disabled

When the unit switches to battery power, the UPS can

disconnect power to the

Controlled Outlet Group to save

runtime.

Configure this delay time, use the

LOAD SHED TIME

WHEN ON BATTERY setting.

Load Shed Time

when On Battery

Disabled

Set the value in

seconds

The amount of time the outlets will function on battery

power before they will turn off.

Load Shed On

Runtime

Disabled

• Shutdown with

delay

• Shutdown

immediately

• Turn off

immediately

• Turn off with delay

• Disabled

When the battery runtime falls below the specified

value, the

Controlled Outlet Group will turn off.

Configure this time using the

LOAD SHED RUNTIME

REMAINING setting.

Load Shed On

Runtime

Remaining

Disabled

Set the value in

seconds

When the remaining runtime reaches this level, the

Controlled Outlet Group will turn off.

Load Shed on

Overload

Disabled

• Disabled

• Enabled

In the event of an overload (greater than 100% output),

the

Controlled Outlet Group will immediately turn off to

conserve power for critical loads. The

ControlledOutlet

Group

will only turn on again with a manual command.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Kommentare zu diesen Handbüchern

Keine Kommentare

APC SMT750RMI2U Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Unterbrechungsfreie Stromversorgungen (USVs) APC SMT750RMI2U