APC MGE SNMP/Web Card Bedienungsanleitung PDF herunterladen (Seite 16)

Network

Management Card

User Manual

Network Management Card

– User Manual 34003676EN/HA

Page

16/81

“Communication”: indicates the status of the communication between the card and the STS

“Output”: indicates whether the output is or not powered

“Output load level”: indicates the power percentage used at STS output

“Transfer”: indicates if it is possible to switch from one used source to the other.

3.2.2.3 “Sources status” zone:

◗ “Active source”: indicate which source is currently used.

Possible values are:

- 1: for source 1

- 2 : for source 2

– Unknow : if value unknown (intialization, lost of communication)

◗ “Prefered source”: indicate which source is used, if none source is faulty

Possible values are:

- 1: for source 1

- 2 : for source 2

– Unknow : if value unknown (intialization, lost of communication)

3.2.3 About

The “About your UPS” or “About your STS” zone provides information on the UPS / STS, in particular, the

name range and software version. Are also available, the current NMC firmware release.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 80 81

Keine Kommentare

APC MGE SNMP/Web Card Bedienungsanleitung Seite 16