APC RAID Subsystem SCSI-SATA II Spezifikationen PDF herunterladen (Seite 34)

Figure 2-5: Installing a BBU Module

2.7. Hard Drive Installation

2.7.1 Hard Drive Installation Overview

WARNING!

1. Handle hard drives with extreme care. Hard drives are very delicate. Dropping a

drive onto a hard surface (even from a short distance) and hitting or touching the

circuits on the drives with your tools may all cause damage to drives.

2. Observe all ESD prevention methods when handling hard drives.

3. Only use screws supplied with the drive canisters. Longer screws may damage the

disk drives.

2.7.2 Hard Drive Installation Pre-requisites

CAUTION!

The hard drives and drive trays should only be installed into the subsystem after the

subsystem has been mounted into a rack cabinet. If the hard drives are installed first,

the subsystem will be too heavy to lift into position and the possible impact during

installation may damage your drives.

Hard drives for the subsystem must be purchased separately. When purchasing the hard

drives, the following factors should be considered:

2-10

Hard Drive Installation

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 99 100

Keine Kommentare

APC RAID Subsystem SCSI-SATA II Spezifikationen Seite 34