APC AP9212 Technical Information PDF herunterladen (Seite 10)

PowerNet MIB Reference Guide

Chapter 1: PowerNet MIB

Structure

This chapter categorizes the PowerNet MIB into its major OID and trap components as follows:

• PowerNet MIB Traps

• PowerNet MIB OIDs

PowerNet MIB Traps

Any Management Card, PowerNet Agent, or MasterSwitch unit can send traps to an NMS when

specific events occur. The NMS does not need the PowerNet MIB to receive the trap, but it does need

the MIB to interpret the trap’s meaning. Also, the trap receiver definitions that a particular device or

Agent uses determines which NMSs can receive traps.

For more information on traps, see Chapter 9, PowerNet MIB Traps.

PowerNet MIB OIDs

The PowerNet MIB OIDs allow an NMS to use its SNMP browser to manage any of the following:

• A Management Card, its UPS and an Environmental Monitor

• A PowerNet Agent, its UPS and Environmental Monitor

• A MasterSwitch unit

However, the NMS can manage a device only if the SNMP access controls of that device allow the

NMS to have SNMP access. (A PowerNet Agent, which has limited control over a UPS, does not use

SNMP access controls.)

The following sections further explain how to use OIDs:

• SNMP Access Controls

• SNMP Browser Structure

• PowerNet MIB OIDs Structure

• Tabled OIDs

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 94 95

Keine Kommentare

APC AP9212 Technical Information Seite 10