6
NetBotz Wireless Sensor Pod 180 Installation Guide
Installing the Wireless Sensor Network
The order in which you install your wireless network is important.
Warning: Although every Wireless Sensor Pod has a battery
compartment, ONLY End Devices require batteries.
DO NOT insert batteries into a sensor pod that will be a Router
or a Coordinator.
For best results, power and configure your wireless network as follows:
Scan the extended addresses of the Wireless Sensor Pods. Use a
barcode scanner to scan the Extended Address QR code (not the serial number)
on the label inside the battery compartment door of each Wireless Sensor Pod.
Save a list of extended addresses to a text file. To add the extended addresses to
your wireless network, copy and paste the list in the Wireless Sensor Setup task
in the Advanced View.
Select the Coordinator and Routers. Choose the Wireless Sensor Pod
that will become the Coordinator. Note the extended address of the
Coordinator. Choose one or more Wireless Sensor Pods to become Routers.
Mount the sensor pods. Mount the Coordinator, Routers, and End Devices
using the instructions in “Mounting the Wireless Sensor Pod” on page 7.
Power the Coordinator. Power the Coordinator FIRST. Connect one and
only one Coordinator to a USB Type A port on the NetBotz appliance. Make a
note of the port to which the Coordinator is attached, for example USB-A.
Configure the Coordinator. Open the Advanced View, and use the Wireless
Sensor Setup task to add the extended addresses of all the Wireless Sensor Pods
in your wireless network to the commission list. Apply the commission list to
save it to the NetBotz appliance. Ensure the extended address of the
Coordinator is in the commission list, and then configure the Coordinator.
Power the Routers. Power each Router using the included AC-USB
adapter, not directly connected to the NetBotz appliance. To limit traffic on the
network, do not power the Routers until after the Coordinator is powered and
configured.
Power the End Devices. Insert the included batteries into End Devices. To
preserve battery life, do not insert the batteries into the End Devices until after
the Coordinator and the Routers are powered, and the Coordinator is
configured.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern