APC NBWL0456 Installationsanleitung PDF herunterladen (Seite 17)

NetBotz Wireless Sensor Pod 180 Installation Guide

LED Activity

The LED on the Wireless Sensor Pod flashes to indicate certain statuses or

alerts.

During the boot process in all three modes, the LED on the sensor pod flashes

yellow rapidly for about 40 seconds, turns solid yellow for 10 seconds, and then

flashes a quick green, yellow, red LED sequence.

Coordinator LED activity

The following table lists the possible LED activities and their meaning for a

sensor pod configured as a Coordinator:

Router LED activity

To limit traffic on the network, the Router will attempt to rejoin the network

after waiting the following number of seconds: 5, 15, 30, 60, 120, 300.

If the attempts to rejoin the network fail, the Router will scan the network every

300 seconds + a random number of seconds. This additional random time

prevents multiple Routers from attempting to connect at the same time.

LED Activity Meaning

Flashing green Normal status

The network was formed successfully.

Off Forming a network

Flashing yellow, then solid yellow Booting

Solid green Joined another network as a Router.

Solid red Unable to form a network due to wireless

energy interference.

Relocate the Coordinator, and reboot the

sensor pod.

LED Activity Meaning

Solid green Normal Status - network present

Flashing yellow, then solid yellow Booting

Solid yellow Searching for network

Off The pod was previously configured as a

Coordinator.

Reset the sensor pod to factory defaults.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Keine Kommentare

APC NBWL0456 Installationsanleitung Seite 17