APC Metered Rack Betriebsanweisung PDF herunterladen (Seite 15)

USER’S GUIDE

Metered Rack PDU

Item Function



Load Indicator LED Identifies overload and warning conditions for the

displayed phase or bank. See Load indicator LED.



Input Selector On 3-phase models, press the input selector to

monitor the current of the next phase or bank.

For either 1- or 3-phase units, press and hold the

input selector to display the IP address of the Rack

PDU or to invert the display. At five seconds, the IP

address is displayed; at ten seconds, the displayed

numbers invert.



10/100 Base-T Connector Connects the Rack PDU to the network.



Status LED See Status LED.



Link-RX/TX LED See Link-RX/TX (10/100) LED.



RJ-12 Serial Port Connects the Rack PDU to a terminal emulator

program for local access to the control console. Use

the supplied serial cable (APC part number

940-0144A).



Digital Display Displays the current (amps) for the phase or bank

indicated by the illuminated Load Indicator LED. On

3-phase models, the Digital Display will cycle

through the phases or banks, displaying the current

for each phase or bank for 3 seconds.

If an internal communication failure occurs (for

either a 1- or 3-phase model), the Digital Display

displays Er, which you can clear by pressing the

input selector.



Reset Button Resets the Rack PDU without affecting the outlet

status.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 109 110

Keine Kommentare

APC Metered Rack Betriebsanweisung Seite 15