APC AR1100 Betreibershandbuch PDF herunterladen (Seite 19)

BEFORE USE: Device Description

• CLR button ( )

Used to clear the measured data.

When the CLR button is pressed for about a second, all the measured data is erased.

• Print button ( )

When this button is pressed while the memory indicator is lit, measured results are printed out.

If this button is pressed when the memory indicator is turned off, the printer paper is fed.

LCD screen

5.7-inch color LCD screen. The LCD screen panel pops out when the lower

portion of the panel is pulled toward you.

When operating the device in an upright position, tilt the panel so that the

indications on the screen are clear.

The panel is reset to its original position by magnet.

Memory indicator

Indicates that measured data is being stored in memory.

Start button

When the start button is pressed, the measurement takes place regardless of the alignment and focusing

status of the device.

Joystick

Used for alignment and focusing.

Tilt the joystick to the right and left for alignment. Turn the joystick for alignment in the up and down directions. For

focusing, push the joystick forward and pull it backward.

Locking lever

Used to fix the main body to the base unit.

To lock the main body, press the locking lever down.

Power switch

Used to turn on or off the power to the device.

Printer cover

Inside is the printer equipped with the auto cutter located. Open the printer cover for replacing printer paper

by pressing the cover open button.

Cover open button

To open the printer cover, press the button.

ON Measured data is stored in the internal memory.

OFF Measured data is not stored in the internal memory.

Blinking Sleep mode

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 143 144

Keine Kommentare

APC AR1100 Betreibershandbuch Seite 19