APC AP9613 Installationshandbuch PDF herunterladen (Seite 16)

Installation Manual

2. A properly configured DHCP server responds with a DHCP offer that

includes all the settings that the NMC needs for network communication.

The DHCP offer also includes the Vendor Specific Information option

(DHCP option 43). The NMC can be configured to ignore DHCP offers that

do not encapsulate the APC cookie in DHCP option 43 using the following

hexadecimal format. (The card does not require this cookie by default).

Option 43 = 01 04 31 41 50 43

where

– the first byte (01) is the code

– the second byte (04) is the length

– the remaining bytes (31 41 50 43) are the APC cookie.

See your DHCP server documentation to add code to the Vendor

Specific Information option.

The NMC Web interface has options to utilize vendor-specific data to

require the DHCP server to provide an “APC” cookie which will supply

information to the NMC. See the User’s Guide for information.

Local access to the command line interface

You can use a computer connected to the serial port on the front of the Network

Management Card to access the command line interface.

1. Select a serial port at the local computer, and disable any service that uses

that port.

2. Use the provided serial cable (part number 940-0299) to connect the

selected port to the serial port on the front panel of the Network

Management Card.

3. Run a terminal program (such as HyperTerminal, TeraTerm, PuTTY) and

configure the selected port for 9600 bps, 8 data bits, no parity, 1 stop bit,

and no flow control. Save the changes.

4. Press

ENTER, repeatedly if necessary, to display the User Name prompt.

5. Use apc for the user name and password.

See “Command line interface” on page 14 to finish the configuration.

DMP IM 990-3404.book Page 12 Monday, March 11, 2013 9:05 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Keine Kommentare

APC AP9613 Installationshandbuch Seite 16