APC AP9613 Installationshandbuch PDF herunterladen (Seite 23)

Installation Manual

SNMPv1 and SNMPv3. To use StruxureWare Central to manage the Network

Management Card on the public network of an StruxureWare system, you must have

SNMPv1 enabled in the unit interface. Read access allows StruxureWare Central to

receive traps from the Network Management Card. Write access is required while

you set StruxureWare Central as a trap receiver.

To enable or disable SNMP access, you must be an Administrator. Use the NMC

Web interface to set it up.

FTP and SCP

You can use

FTP (enabled by default) or SCP to transfer downloaded firmware to

the Network Management Card, or to access a copy of the Network Management

Card’s event or data logs.

To use StruxureWare Central to manage the UPS, you must have the

FTP Server

option enabled in the Network Management Card interface.

To enable or disable FTP server access, you must be an Administrator. Use the

NMC Web interface to set it up.

To transfer firmware, see the User’s Guide.

To retrieve a copy of the event or data log, see the User’s Guide.

Manage the security of your system

For detailed information on enhancing the security of your system after

installation and initial configuration, see the Security Handbook,

available on the Network Management Card Utility CD and on the APC

Web site,

www.apc.com.

DMP IM 990-3404.book Page 19 Monday, March 11, 2013 9:05 AM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Keine Kommentare

APC AP9613 Installationshandbuch Seite 23