APC AP9613 Installationshandbuch PDF herunterladen (Seite 18)

Installation Manual

Command line interface

After you log on at the command line interface, as described in “Local access to the

command line interface” on page 12 or “Remote access to the command line

interface” on page 13, you can manually configure network settings.

1. Contact your network administrator to obtain the IP address, subnet mask,

and default gateway for the Network Management Card.

2. Use these three commands to configure network settings. (Text in italics

indicates a variable.)

a. tcpip -i yourIPaddress

b. tcpip -s yourSubnetMask

c. tcpip -g yourDefaultGateway

For each variable, type a numeric value that has the format

xxx.xxx.xxx.xxx.

For example, to set a system IP address of 156.205.14.141, type the

following command and press

ENTER:

tcpip -i 156.205.14.141

3. Type reboot. The Network Management Card restarts to apply the

changes.

.INI file utility

You can use the .INI file export utility to export .INI file settings from configured

NMCs to one or more unconfigured NMCs. The utility and documentation are

included on the Network Management Card Utility CD.

DMP IM 990-3404.book Page 14 Monday, March 11, 2013 9:05 AM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Keine Kommentare

APC AP9613 Installationshandbuch Seite 18