APC AP9613 Installationshandbuch PDF herunterladen (Seite 21)

Installation Manual

How to Access a Configured Network Management Card

Overview

After the UPS Network Management Card (NMC) is running on your network, you

can use the interfaces summarized here: Web interface, Telnet and SSH, SNMP,

FTP, and SCP.

For more information about the interfaces, see the User’s Guide.

Web interface

Use Microsoft Internet Explorer

(IE) 7.x or higher (on Windows operating systems

only) or Mozilla

Firefox

3.0.6 or higher (on all operating systems) to access the

Web interface of the Network Management Card. Other commonly available

browsers may work but have not been fully tested by APC.

You can use either of the following protocols when you use the Web interface:

• The HTTP protocol (enabled by default), which provides authentication by

user name and password but no encryption.

• The HTTPS protocol, which provides extra security through Secure Socket

Layer (SSL); encrypts user names, passwords, and data being transmitted;

and authenticates Network Management Cards by means of digital

certificates.

To access the Web interface and configure the security of your device on the

network:

1. Address the Network Management Card by its IP address (or its DNS name,

if a DNS name is configured).

2. Enter the user name and password (by default,

apc and apc for an

Administrator).

3. To enable or disable the HTTP or HTTPS protocol, use the NMC Web

interface.

See the Security Handbook, available on the Network Management

Card Utility CD or from the APC Web site,

www.apc.com, for more

information on selecting and configuring network security.

DMP IM 990-3404.book Page 17 Monday, March 11, 2013 9:05 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Keine Kommentare

APC AP9613 Installationshandbuch Seite 21