APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 100)

®®

USER’S GUIDE

network management card

Logged events

By default, any event which causes an SNMP trap will be logged, except for

SNMP authentication failures. Additionally, the Management Card will log its

abnormal internal system events. However, you can use the Actions option

in the Web interface’s Events menu to disable the logging of events based

on their assigned severity level, as described in Event Actions (Web

Interface only).

For information about how to access a list of the

UPS, environmental

monitor, and Management Card events, see “Event List” page.

Web interface

The Log option in the Events menu accesses the Event Log. This log

displays all of the events that have been recorded since the log was last

deleted, in chronological order, with the most recent event displayed first. A

Delete Log button allows you to clear all events from the log.

Some System (Management Card) events do not have a

severity level. Even if you disable the Event Log for all

severity levels, these no-severity events will still be logged.

The Event Log will log a graceful shutdown of the UPS, even

when that shutdown was not initiated by the Management

Card: a graceful shutdown from Serial Port 1 typically

indicates that PowerChute or PowerNet Manager performed

the shutdown; a graceful shutdown from Serial Port 0

typically indicates that a management peripheral, such as

PowerVew or the Out-of-Band Management Card, initiated

the shutdown.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 149 150

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 100