APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 51)

®®

USER’S GUIDE

network management card

SNMP

An Access option (the Settings option in the control console) enables (by

default) or disables

SNMP. When SNMP is enabled, the Access Control

settings allow you to control how each of the four available

SNMP channels

is used.

For information about how to define the up to four NMSs

which will serve as trap receivers, see Trap Receivers; for

more information about how to use

SNMP to manage a UPS

or an environmental monitor, see the PowerNet® SNMP

Management Information Base (MIB) Reference Guide on

the APC Network Management Card utility CD

(.\doc\mi/jointfilesconvert/343392/bguide.pdf).

Setting Definition

Community

Name

This setting defines the password (maximum of 15 characters) which an

NMS that is defined by the NMS IP setting below uses to access the

channel.

NMS IP

Limits access to the

NMS or NMSs specified by the format used for the

IP address.

• 159.215.12.1 allows only the

NMS with that specific IP address to

have access

• 159.215.12.255 allows access for any

NMS on the 159.215.12

segment

• 159.215.255.255 allows access for any

NMS on the 159.215 segment

• 159.255.255.255 allows access for any

NMS on the 159 segment

• 0.0.0.0 or 255.255.255.255 allows access for any

NMS

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 149 150

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 51