APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 82)

®®

USER’S GUIDE

network management card

General Settings

Four General Settings are available for Smart-UPS. The first two settings

(UPS Name and Last Battery Replacement) are available for all other

UPS models.

Return Delay

Defines how long a

UPS must wait before it turns on after a

shutdown that was caused by a power failure.

Note:The

UPS must also have the capacity specified by the

Return Battery Capacity setting before it can turn on.

Sleep Time

Defines how long the

UPS will sleep (stay turned off) when you

use either one of the Control menu’s sleep options (Put UPS

To Sleep or Put UPS To Sleep Gracefully).

Note: This setting also appears in the “Control” page.

Action Definition

In the control console, you use the Battery option in the

Configuration menu to access the Last Battery

Replacement and External Batteries settings.

Setting Definition

UPS Name Defines the name used by the

UPS.

Last Battery

Replacement

Defines the date when the

UPS battery was last replaced.

Note: Use an mm/dd/yy format.

Audible Alarm

Defines when the Smart-UPS will generate an alarm in

response to going on battery.

External Batteries

Defines how many external battery packs are connected to

Smart-UPS XL.

Note: Smart-UPS XL models cannot automatically sense and

report the number of connected battery packs.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 149 150

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 82