APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 45)

®®

USER’S GUIDE

network management card

Option Settings

TCP/IP

This option accesses the following settings:

• A Boot mode setting selects the method used to define the three

TCP/

IP values that a Management Card needs to operate on the network:

– System IP: The

IP address of the Management Card

– Subnet Mask: The subnet mask value

– Default Gateway: The

IP address of the default gateway

• Advanced settings define the Management Card’s host and domain

names, as well as TCP/IP port, BOOTP, and DHCP settings used by

the Management Card.

Current TCP/IP settings fields. The current System IP, Subnet Mask,

and Default Gateway values, along with the Management Card’s MAC

Address, Host Name, Domain Name, and Ethernet Port Speed values

are displayed above the TCP/IP settings in the control console and the Web

interface.

For information about the watchdog role the default

gateway plays, see

The role of the Default Gateway in

resetting the network timer

; for information about how to

configure the initial

TCP/IP settings when you install the

Management Card, see the Network Management Card

Installation and Quick Start Manual, provided in printed

form and on the APC Network Management Card utility CD

(.\doc\insguide.pdf).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 149 150

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 45