APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 15)

®®

USER’S GUIDE

network management card

Features

AP9618 or AP9619 Description

9-pin connector

• Output relay (Output): Normally closed (NC), common

(COM), and normally open (NO) pins used by the

Integrated Environmental Monitor’s output relay at an

AP9618 or AP9619 Management Card.

• Power (Pwr): Normally-open ground (GND NO) and

+12VDC pins.

• Input contacts (Zone 1 and 2): Two sets of normally

closed (NC) and common (COM) pins used by the

Integrated Environmental Monitor at an AP9618 or

AP9619 Management Card.

Probe connector

Connects a Temperature/Humidity probe to the IEM at the

AP9618 or AP9619 Management Card.

Modem connector

(AP9618 only)

Connects the internal analog modem at an AP9618

Management Card to an analog phone line to provide for

out-of-band communications.

All Management Cards Description

Reset button Resets the Management Card while power remains on.

10/100 Base-T connector Connects the Management Card to the Ethernet network.

Link-

RX/TX (10/100) LED See Link-RX/TX (10/100) LED.

Status

LEDsSee Status LEDs.

1 For information about how to manage the Integrated Environmental Monitor, see

Environment Menu.

2 For information about how to configure this feature for dial-in access to the control console at

an AP9618 Network Management Card, see Modem (AP9618 control console).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 149 150

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 15