APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 21)

®®

USER’S GUIDE

network management card

Local access to the control console

You can use a local computer, a computer that connects to the

Management Card through the serial port at the Management Card’s UPS

or expansion chassis, to access the control console.

1. Select a serial port at the local computer and disable any service which

uses that port.

2. Unless an APC smart-signaling cable (940-0024 or 940-1524) is

already connected to the selected port, connect the smart-signaling

cable that came with the Management Card to the selected port and to

the serial port at the Management Card’s UPS or chassis.

3. Run a terminal program (such as HyperTerminal) and configure the

selected port for 2400 bps, 8 data bits, no parity, 1 stop bit, and no flow

control, and save the changes.

4. Press

ENTER to display the User Name prompt.

5. Enter your User Name and Password.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 189 190

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 21