APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 62)

®®

USER’S GUIDE

network management card

• Display the configured parameters of a digital server certificate, if one

is installed.

Creating and uploading a server certificate in advance

reduces the time required to enable HTTPS (SSL/TLS). If no

server certificate is loaded when you enable HTTPS (SSL/

TLS), the Management Card creates one when it reboots.

The Management Card can take up to 5 minutes to create

this certificate, and the SSL/TLS server is not available

during that time.

Option Description

Web/SSL/TLS Network Configuration

Access Enables or disables the access method selected in Protocol Mode.

Protocol Mode Choose one of the following:

• HTTP: User names, passwords, and data are transmitted without

encryption.

• HTTPS (SSL/TLS): User names, passwords and data are

transmitted in encrypted form, and digital certificates are used for

authentication.

OTE: To enable HTTPS (SSL/TLS), change the setting and then click

Next>> in the Web interface, or choose Accept Changes in the

control console. You must then agree to the license agreement that is

displayed. To activate the changes you must log off and log back on to

the interface. When SSL is activated, your browser displays a lock

icon, usually at the bottom of the screen.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 189 190

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 62