APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 92)

®®

USER’S GUIDE

network management card

Action Definition

Turn UPS On

(control

console)

This action turns on power at the UPS.

For a Synchronized Control Group, after a delay of a few seconds, the

action turns on all enabled group members that have input power.

Turn UPS Off This action turns off power immediately at the UPS, without a shutdown

delay, and the UPS remains off until you turn on its power again.

If the UPS is a member of a Synchronized Control Group, this action

turns off power at all UPSs that are enabled members of the group. No

Shutdown Delay is used. The UPSs turn off after a few seconds, and

they remain off until you turn on their power again.

OTE: For a synchronized turn-off action that uses the Shutdown

Delay of the initiating UPS, use SNMP. Set the value

turnUpsSyncGroupOffAfterDelay (5) for the upsAdvControlUpsOff

OID.

Turn UPS Off

Gracefully

(control

console)

This action turns off power after the UPS’s Maximum Shutdown Time

plus two minutes, and its Shutdown Delay. For information about how

the Maximum Shutdown Time is determined, see Maximum-

Shutdown-Time negotiation.

For a Synchronized Control Group, the action is performed using the

delays configured for the group member that initiated the action.

1 When you select Yes for the Web interface’s Signal servers option, initiating a Turn UPS

Off, Reboot UPS, or Put UPS To Sleep action is equivalent to selecting Turn UPS Off

Gracefully, Reboot UPS Gracefully, or Put UPS To Sleep Gracefully in the control

console.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 189 190

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 92