APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 97)

®®

USER’S GUIDE

network management card

Utility Line Settings

This Configuration menu option is available to all UPS models except a

Silcon UPS. The available settings differ based on the UPS model.

Smart-UPS or Matrix-UPS. Not all Utility Line settings are available for

all Smart-UPS and Matrix-UPS models, and each setting’s selections can

differ by UPS model.

Setting Definition

Output Voltage The nominal AC voltage level for the UPS output.

High Transfer

Voltage

The upper limit of acceptable input voltage. When the input

reaches this value:

• Matrix-UPS switches to battery operation

• Smart-UPS starts to use its AVR Trim feature.

Low Transfer Voltage The lower limit of acceptable input voltage. When the input

reaches this value, Smart-UPS starts to use its AVR Boost

feature or switches to battery operation if it does not have this

feature.

OTE: For Matrix-UPS, this setting cannot be changed.

Bypass Upper

Voltage

The input voltage above which the UPS cannot switch to bypass

mode.

Bypass Lower

Votage

The input voltage below which the UPS cannot switch to bypass

mode.

Vout Reporting

(Matrix-UPS)

How Matrix-UPS scales its output voltage readings.

Sensitivity How sensitive the UPS will be to distortions in the input voltage.

NOTE: Matrix-UPS always uses the Automatic setting.

Output Frequency

Range

Defines the nominal value for the frequency used by the output

voltage.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 189 190

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 97