APC Network Management Card AP9617 Betriebsanweisung PDF herunterladen (Seite 46)

®®

USER’S GUIDE

network management card

Advanced settings. The boot mode affects which settings are available:

• Two settings are available for all Boot mode selections to define the

Management Card’s Host Name and Domain Name values.

• A Port Speed setting is available for all Boot mode selections to

define the TCP/IP port’s communication speed (Auto-negotiate, by

default).

• Three settings are available for all Boot mode selections, except

Manual, to identify the Management Card in BOOTP or DHCP

communication:

– Vendor Class: Uses APC, by default.

– Client ID: Uses the Management Card’s MAC address, by default.

– User Class: Uses the Management Card’s application module

type, by default. For example, a Symmetra module sets the User

Class to SY, and a Smart-UPS/Matrix-UPS module sets it to

SUMX.

• Two settings are available if BOOTP only is the Boot mode selection:

– Retry Then Fail: Defines how many times the Management Card

will attempt to discover a BOOTP server before it stops (4, by

default).

– On Retry Failure: Defines what TCP/IP settings will be used by

the Management Card when it fails to discover a BOOTP server

(Use Prior Settings, by default).

Caution

If the Client ID is changed from the Management Card’s

MAC address, the new value must be unique on the LAN.

Otherwise, the DHCP or BOOTP server may act incorrectly.

For information about the Advanced settings (DHCP Cookie

Is and Retry Then Stop) that directly affect how DHCP is

used, see Boot Mode.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 189 190

Keine Kommentare

APC Network Management Card AP9617 Betriebsanweisung Seite 46