APC IP DSLAM Betriebsanweisung PDF herunterladen (Seite 167)

100

101

159

Vlan Index. In case the management vlan (i.e.

'mgmtvlanid' or the associated 'portvlanid', if

'mgmtvlanid' is zero) doesn't exist on the system

then IP based management on this management

VLAN shall not happen on the interface till the

corresponding VLAN is created with the Net side

port as its member.

Type: Create － Optional

Modify － Optional

Valid values: 0 － 4095

Default value: 0

mgmtsvlanid

<mgmtsvlanid-val>

Applicable only in stacked vlan mode, this is S-

Vlan for management traffic on this interface.

Non-zero value of this field is valid only if either

'ip' field is nonzero or 'usedhcp' field is true. If no

management Svlanid is specified (in the create

operation) or it's value is set to zero (either in

create or modify operation) then the system shall

use the value of 'psvlanid' associated with the

bridge port created on this interface as the

management vlan id. In case the management

vlan (virtual vlan mapped to S-VLAN and C-

VLAN for the frame) doesn't exist (ie. Virtual vlan

mapped to 'mgmtsvlanid' or the associated '

psvlanid ', if 'mgmtsvlanid' is zero) on the system

then IP based management shall not happen on

the interface till the corresponding virtual-VLAN

is created with the Net side port as its member.

Type: Create － Optional

Modify － Optional

Valid values: 0 – 4095

Default value: 0

priority <priority-val>

Priority to be set in Tagged Ethernet PDUs sent

on Management VLAN over this interface. This

field is valid only if either 'ip' field is non-zero or

'usedhcp' field is true. In Native Vlan mode this

priority shall be used for C-Vlan tag while in

stacked vlan mode it shall be used for S-Vlan

tag.

Type: Create － Optional

Modify － Optional

Valid values: 0 - 7

Default value: 7

enable | disable

Administrative status of the interface.

Type: Create -- Optional

Modify -- Optional

Valid values: enable, disable

Default value: enable

Example

$ create aggr intf IfName aggr-0 ip 172.25.100.100 mask 255.255.0.0

usedhcp False mgmtvlanid 2 mgmtsvlanid 2 priority 2 enable

Output

Verbose Mode On

Entry Created

Interface Index : aggr-0

IP Address : 172.25.100.100 Mask :

255.255.0.0

UseDhcp : False

Mgmt VLAN Index : 2

Mgmt S-VLAN Index : 2

Tagged Mgmt PDU Prio : 2

Oper Status : Up Admin Status : Enable

Verbose Mode Off:

Entry Created

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 602 603

Kommentare zu diesen Handbüchern

Keine Kommentare

APC IP DSLAM Betriebsanweisung Seite 167

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung APC IP DSLAM