APC IP DSLAM Betriebsanweisung PDF herunterladen (Seite 168)

160

Output Fields

Field Description

Interface Index

This specifies the interface index used for the

Aggregator type of interfaces. Valid Value is

aggr-0

IP Address

This specifies the IP address configured for the

interface.

Mask

This specifies the network mask configured for

the interface. If either of 'IP Address' or 'mask' is

non-null the other must also be non-null and vice

versa.

UseDhcp

This specifies whether a DHCP client is to be

triggered to obtain an IP address for this

interface from a DHCP server.

Mgmt VLAN Index

VLAN(C-Vlan) for management traffic on this

interface. Non-zero value of this field is valid

only if either 'ip' field is non-zero or 'usedhcp'

field is true. If no Management Vlanid is

specified (in the create operation) or it's value is

set to zero (either in create or modify operation)

then the system shall use the value of

'portvlanid' associated with the bridge port

created on this interface as the Management

Vlan Index. In case the management vlan (i.e.

'mgmtvlanid' or the associated 'portvlanid', if

'mgmtvlanid' is zero) doesn't exist on the system

then IP based management on this management

VLAN shall not happen on the interface till the

corresponding VLAN is created with the Net side

port as its member.

Mgmt S-VLAN Index

Applicable only in stacked vlan mode, this is S-

Vlan for management traffic on this interface.

Non-zero value of this field is valid only if either

'ip' field is nonzero or 'usedhcp' field is true. If no

management Svlanid is specified (in the create

operation) or it's value is set to zero (either in

create or modify operation) then the system shall

use the value of 'psvlanid' associated with the

bridge port created on this interface as the

management vlan id. In case the management

vlan (virtual vlan mapped to S-VLAN and C-

VLAN for the frame) doesn't exist (ie. Virtual vlan

mapped to 'mgmtsvlanid' or the associated '

psvlanid ', if 'mgmtsvlanid' is zero) on the system

then IP based management shall not happen on

the interface till the corresponding virtual-VLAN

is created with the Net side port as its member.

Tagged Mgmt PDU Prio

Priority to be set in Tagged Ethernet PDUs sent

on Management VLAN over this interface. This

field is valid only if either 'ip' field is non-zero or

'usedhcp' field is true. In Native Vlan mode this

priority shall be used for C-Vlan tag while in

stacked vlan mode it shall be used for S-Vlan

tag.

Oper Status

The actual/current state of the interface. It can

be either up or down.

Admin Status

The desired state of the interface. It may be

either Up or Down.

Cautions

• If an aggregator interface is being created, all configurations of

aggregated links (layer2 ethernet interfaces), should be same.

8.4.3 LACP Aggr Commands

8.4.3.1 Get lacp aggr

Description: Use this command to get.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 602 603

Kommentare zu diesen Handbüchern

Keine Kommentare

APC IP DSLAM Betriebsanweisung Seite 168

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung APC IP DSLAM