APC IP DSLAM Betriebsanweisung PDF herunterladen (Seite 77)

100

101

Application Note

5. Choose an Alarm Profile from the Alarm Profile Name drop-down list. If to

configure an Alarm Profile, Click on

to activate the Alarm Profile Configuration

window.

If necessary, modify values of a specified PVC, including VPI, VCI, Admin Status,

Learning Status, Sticky Status, Pvid, Accepted Frame Type and Ingress Filter,

and prioriy.

6. Click on

to submit your settings or click on to close the

fmBridgeport window.

7. If to create new PVC, click on

and then PVC2 appears and then

users can set peremeters via PVC2. after that, click on

to submit your

setting.

Table 4-9 Port Configuration Field Definitions

Field Definition

DSL Port Port No. of the ADSL2/2+ IP DSLAM

VPI Virtual Path Identifier

VCI Virtual Channel Identifier

Learning Status The state of learning on this bridge port. The value

enable (1) indicates that unicast Mac address

learning is enabled and the value disable indicates

that unicast Mac address learning is disabled on this

bridge port.

Sticky Status Indicates if the port has been set as sticky. The value

enable (1) indicates that the entries learned on this

port will not be aged out. It also indicates that the

entries learned on this port shall not be learned on

any other port. The entries learned on this port can

only be removed by management action or by

making the value as disable (2), so that the entries

can be aged out.

Pvid Port VID

Accepted Frame Type Used to up/down connection.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 602 603

Kommentare zu diesen Handbüchern

Keine Kommentare

APC IP DSLAM Betriebsanweisung Seite 77

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung APC IP DSLAM