APC IP DSLAM Betriebsanweisung Seite 394

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 603
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 393
386
Src Ip Addr Cmp
Source IP address comparison type.'Ingenlist'
means check if source IP address present in
interface classifier generic list.'Notingenlist'
means check if source IP address not present in
interface classifier generic list. 'Ingenlist' and
'Notingenlist' are invalid if the direction of the
rule for which this subrule is being created is
'out'.
Dest Ip Addr Cmp
Destination IP address comparison
type.'Ingenlist' means check if destination IP
address present in interface classifier generic
list.'Notingenlist' means check if destination IP
address not present in interface classifier
generic list.'Ingenlist' and 'Notingenlist' are
invalid if the direction of the rule for which this
subrule is being created is 'out'.
Ip Src Addr Mask
The mask value for source IP address. The
mask is applied over the source IP address
before checking against a value.
Ip Dest Addr Mask
The mask value for destination IP address. The
mask is applied over the destination IP address
before checking against a value.
Subrule Prio
This specifies the priority of the subrule. Based
on this priority value, the subrule is created in
fast or slow memory. In case priority is specified
as 'asinrule', subrule priority will be same as
specified in the rule.
8.13.28 Filter subrule clfrtree Commands
8.13.28.1 Get filter subrule clfrtree
Description: Use this command to get.
Command Syntax: get filter subrule clfrtree [ruleid <ruleid-val>]
[subruleid <subruleid-val >]
8.13.28.2 Create filter subrule clfrtree
Description: Use this command to create.
Command Syntax: create filter subrule clfrtree ruleid <ruleid-val >
subruleid <subruleid-val > tname <tname-val > entrypid <entrypid-val
>
8.13.28.3 Delete filter subrule clfrtree
Description: Use this command to delete.
Command Syntax: delete filter subrule clfrtree ruleid <ruleid-val >
subruleid <subruleid-val >
8.13.28.4 Modify filter subrule clfrtree
Description: Use this command to modify.
Command Syntax: modify filter subrule clfrtree ruleid <ruleid-val >
subruleid <subruleid-val > [tname <tname-val >] [entrypid <entrypid-
val >]
Parameter
Name Description
Seitenansicht 393
1 2 ... 389 390 391 392 393 394 395 396 397 398 399 ... 602 603

Kommentare zu diesen Handbüchern

Keine Kommentare