APC IP DSLAM Betriebsanweisung PDF herunterladen (Seite 249)

100

101

241

and the associated shaping parameter. Value of

this parameter is in range 0 - 127, in multiples of

-0.5 dB. 127 is a special value indicating the

subcarrier is not transmitted. It is available only

for ADSL2/ADSL2plus.

GainspsUs

This parameter defines the upstream gains

allocation table per subcarrier. It is an array of

integer values in the 0 to 4093 range for

subcarriers 0 to NSCus-1. The gain value is

represented as a multiple of 1/512 on linear

scale. It is supported for ADSL2/ADSl2plus only.

GsSeltInfoValid

Indicates the information validity for the SELT

operation conducted on the Xcvr.

GsSeltLoopLen (in

Feet)

Indicates the LOOP Length in Feet once when

the SELT information is valid on the Xcvr.

GsSeltLoopEnd

Indicates whether the loop is short or open once

when the SELT information is valid on the Xcvr.

GsSeltLoopGauge

Indicates the LOOP wire gauge information

once, when the SELT information is valid on the

Xcvr.

GsSeltUpShannonCap

(in bps)

Indicates the upstream shannon capacity once,

when the SELT information is valid on the Xcvr.

GsSeltDownShannonC

ap (in bps)

Indicates the downstream shannon capacity

once, when the SELT information is valid on the

Xcvr.

AtucGsSeltInbandNois

512 values that indicate inband noise length in

dBM/Hz, covering both bands from 0 to 1.1 MHz.

AtucGsSeltTermination

Resp

180 discrete values that indicate termination

response magnitude from 0 to 18Kft.

AtucGsSeltUpMgnAtRa

300 values that indicate SNR margin in dB/10 at

a particular rate are provided, at 100K

increments, up to 15 Mbps.

AtucGsSeltDownMgnAt

Rate

300 values that indicate SNR margin in dB/10 at

a particular rate are provided, at 100K

increments, up to 15 Mbps.

Delt HLINSCus

The DELT-related parameter that provides the

scale factor to be applied to the upstream Hlin (f)

values. (Not available for ADSL and ADSL2plus)

Delt HLOGMTus

The DELT-related parameter that provides the

number of symbols used to measure the

upstream Hlog (f). (Not available for ADSL and

ADSL2plus)

Delt QLNMTus

The DELT-related parameter that provides the

number of symbols used to measure the

upstreamQLN (f) values. (Not available for ADSL

and ADSL2plus)

DELT Last Tx State

The DELT-related parameter that provides the

last successful transmitted initialization state by

the ATUC. (Not available for ADSL and

ADSL2plus)

Delt SnrmtUs

DELT-related parameter that provides the

number of symbols used to measure the

upstream SNR(f) values. (Not available for

ADSL and ADSL2plus).

DELT Curr Status

Current Status of Atuc Line in DELT Mode

Delt HLINpsus

The DELT-related parameter that provides an

array of complex upstream Hlin (f) values in

linear scale. (Not available for ADSL and

ADSL2plus)

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 602 603

Kommentare zu diesen Handbüchern

Keine Kommentare

APC IP DSLAM Betriebsanweisung Seite 249

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung APC IP DSLAM