APC IP DSLAM Betriebsanweisung PDF herunterladen (Seite 334)

100

101

326

Mask <net-mask>

This parameter specifies the network mask

configured for the interface. This is given in

conjunction with IP Address configured and shall

be given only if IP address has been given. This

shall be removed whenever IP Address is

removed. ’Modify’ of network mask for an

Ethernet interface shall be supported only if

some IP address is configured on the interface

or 'etherUseDhcp' was configured to

"GS_TRUE" previously. If Usedhcp is GS_TRUE

and ’modify’ is done for this field, then usedhcp

field shall be set to GS_FALSE. Both usedhcp

and this field shall not be specified together.

Type : This field is not allowed when a physical

interface is specified and IP is 0.0.0.0. In all

other cases the field is mandatory.

Valid Values : 255.0.0.0 - 255.255.255.255

Default Value: None

usedhcp true | false

This parameter specifies whether a DHCP client

is to be triggered to obtain an IP address for this

interface. If this is configured as GS_FALSE and

‘etherIfIpAddress’ is not configured, then

management IP traffic will not flow through the

interface. If an IP address is configured

and ’modify’ is done for this field, then

‘tEtherIfIpAddress’ and ‘tAggrIfNetMask’ fields

shall be set to Zero (0.0.0.0). Both Usedhcp and

‘tEtherIfIpAddress’ shall not be specified

together. In case Iftype is ‘slave’, then this field

can not be set to GS_TRUE.

Type : Optional

Valid value : true or false

Default value: false

speed {auto |100 BT|

1000BT}+

The Ethernet speed for the net-side

interfaces.

Type : Optional.

Valid Values : auto, 100BT, 1000BT.

Default Value : auto.

type uplink|downink

This parameter specifies the type of the Ethernet

interfaces. The Net is towards the NET side (2 at

most) and slave means the physical interface

connected to the slave device.

Type : Optional.

Valid Values : uplink, downlink.

Default Value : uplink.

enable|disable

Administrative status of the Ethernet interface.

Type : Modify - Mandatory

Valid values : enable or disable

Default value: enable

1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 602 603

Kommentare zu diesen Handbüchern

Keine Kommentare

APC IP DSLAM Betriebsanweisung Seite 334

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung APC IP DSLAM