APC IP DSLAM Betriebsanweisung PDF herunterladen (Seite 182)

100

101

174

8.5.4.2 Create atm port

Description: Use this command to create.

Command Syntax: create atm port ifname <interface-name> lowif

<lowif-val> [ maxvc <maxvc-val> ] [ maxvpibits <maxvpibits-val> ]

[ maxvcibits <maxvcibits-val> ] [ oamsrc <oamsrc-val> ] [ orl <orl-

val> ] [ trfclassprofileid <trfclassprofileid-val> ] [ profilename

<profilename-val> ] [ ctlpktinstid <ctlpktinstid-val> ]

[ atmtransporttype cell | packet ] [ mirrormode data | mirror ]

[ enable | disable ]

8.5.4.3 Delete atm port

Description: Use this command to delete.

Command Syntax: delete atm port ifname <interface-name>

8.5.4.4 Modify atm port

Description: Use this command to modify.

Command Syntax: modify atm port ifname <interface-

name>[ maxvc <maxvc-val> ] [ maxvpibits <maxvpibits-val> ]

[ maxvcibits <maxvcibits-val> ] [ oamsrc <oamsrc-val> ] [ orl <orl-

val> ] [ trfclassprofileid <trfclassprofileid-val> ] [ profilename

<profilename-val> ] [ atmtransporttype cell | packet ] [ enable |

disable ]

Parameters:

Name Description

ifname <interface-

name>

Physical interface index

Type: Create － Mandatory

Delete － Mandatory

Modify － Mandatory

Get － Optional

lowif <lowif-val>

This is the IfIndex of the low interface on which this

ATM port is configured. Lower interface can be of

type dsl-* or dsli-* or dslf-* or abond-*

Type: Create － Mandatory

maxvc <maxvc-val>

This specifies the maximum number of VCCs

(PVCCs), supported at this ATM interface. This field

is not valid if the atmtransporttype has the value

packet

Type: Create － Optional

Modify － Optional

Valid values: 1 -8

Default value: 8

maxvpibits

<maxvpibits-val>

The maximum number of active VPI bits configured

for use at the ATM interface.

Type: Create － Optional

Modify － Optional

Valid values: 1 - 8

Default value: 8

maxvcibits

<maxvcibits-val>

This specifies the maximum number of active VCI

bits configured for use at this ATM interface.

Type: Create － Optional

Modify － Optional

Valid values: 1 - 16

Default value: 16

oamsrc <oamsrc-val>

Loopback source id assigned to the ATM port. The

ATM port will respond to all loopback cells, which

carry this OAM id. This field is not valid if the

atmtransporttype has the value packet.

Type: Create － Optional

Modify － Optional

Default value: 0xffffffffffffffffffffffffffffffff

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 602 603

Kommentare zu diesen Handbüchern

Keine Kommentare

APC IP DSLAM Betriebsanweisung Seite 182

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung APC IP DSLAM